Technical and Installation Discussions

[Jmas]

Due to the MAS issue 

Sage suggested to fix following error by updating 4.40.06

Is there any fix without updgrading to the new version?

Also if we upgrade do we need to do check up and reinstall it to all workstation?

We have 4.40.05 version currently.

Thanks in advance.

Subject : "Record " is missing from 'C:\Program Files\Sage Software\MAS 200\Version4\MAS90\MAS_System\SY_Workstation.M4T'." when perfroming tasks or launching MAS 200 version 4.40. Info button will show Error 46 or Error 11 from sy_session.pvc

Tracking Number: 111670

Severity Level: 2 - High

Engineering Status: Closed - Fixed

Version Corrected: 4.40.0.6

[thebottomline]

Why the reluctance to upgrade to PU 6 (or even PU7 now)????

[Jmas]

Because we had hard time upgrading to 4.4.05. 

Also we are not sure if our extended modules will be compatiable with new version.

We have about 25 users using MAS 200. we don't want to have down time too long by upgrading to 4.4.06

[TomTarget]

PU #6 is primarily a maintenance update without any significant enhancements so "should be" no major issues in installing it.

However,  you do have to make sure your enhancements are compatible first.  And always back up because surprises do happen - I had one with SU #7 not wanting to install properly -  Tech Support was great and we figured it out - but we had some false starts.