Technical and Installation Discussions

[sew11754]

When I select Visual Integrator, then Import Job Mainenance I recive the following message "The object VI_IMPORTPRESELECT_UI does not exist." . I am attempting to import a customer listing into a new company.

Thanks

Steve

[khmackall]

This indicates that there is either a missing program, missing task or corrupt program on your installation.  You might want to reinstall the V/I Module to see if that corrects the problem.  Be sure you have a backup before reinstalling just to be safe.

Thanks,

Kent Mackall

[rmikolainis]

In addition to Kent's post, check to see if you have a "VI" folder under the "MAS90" folder.  Also, make sure you have proper rights to all the folders.

[BigLouie]

First go into Company Maintenance and make sure that the modules have been activated. The files are not created until then. You cannot create a company code and start importing away, I have seen people try this.  I am assuming this might be the case because you did not indicate system start up but rather a new company.

[BigLouie]

And Welcome to the Sage Community.

[bethbowers]

From Res 455042

Possible Workaround:

Enter the current version in VI_Options.M4T.

1. Open Library Master / Utilities / Data File Display and Maintenance (DFDM).
2. In the 'File Name' field, browse to and select ..\Mas90\\Mas_System\VI_Options.M4T.
3. Click the 'Edit' button and select "3 - DataVersion" from the 'Field Number' drop-down box.
4. In the 'Change' field, replace the version with the current version (for example, "4.05" to "4.10").

[accountingnerd]

Just had this same problem on a fresh install, and had to change the table from 4.2 to 4.4. Then we were in and working.